1/200 MK10 Terrier Missile Launcher
Surat, Gujarat
6 hours ago

Contact "US" for ADDITIONAL HUGE DISCOUNTS on all Ship Superstructures, fittings and armaments between 1/5 - 1/144 scale

1/200 MK10 Terrier Missile Launcher

Regular price $23.62

Shipping calculated at checkout.
Very High Detailed and accurate 1/200 scale MK10 GMS Guided Missile Launching System for US Navy ships. 

Twin-arm launcher for the RIM-2 Terrier or RIM-67 Standard missile. Employed below main deck magazines. Used on Belknap class cruisers and other Terrier ships. Some launchers are modified to store and launch the RUR-5 ASROC.

Used for:
RIM-2 Terrier
RIM-67 Standard Missile SM-1/2ER

Used on:
Belknap class CG
Leahy class CG
Farragut (Coontz) class DDG
USS Reeves (CG 24)
USS Fox (CG 33)
USS Worden (CG 18)
USS England (CG 22)
USS Sterett (CG 31)
USS Josephus Daniels (CG 27)
USS King (DDG 41)
USS Harry E. Yarnell (CG 17)
USS Dewey (DDG 45)
Real scaled from original
Hollowed to saved material
Model unpainted
Set x2

If you need a different size or a custom part designed just for you? 
Please send me a PM.

Some part cleanup will be necessary.  The 3D printing process uses a waxy substance to support certain part features.  Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners.  Customers report that "Bestine" and "Goo Gone" also work well.

During the printing process, liquid resin is cured by ultraviolet light.  Microscopic bits of resin may remain uncured.  Let your parts sit in direct sunlight for a few hours to fully cure the resin.  

Water-based acrylic paints meant for plastics is strongly recommended.  Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.