Ship Class Used On:
- Mark 7: Arkansas (BM-7) class
- "Flush Deck" destroyers: Cassin (D-43), Aylwin (D-47), O'Brien (D-51), Caldwell (D-69), Wickes (D-75) and Clemson (D-186) classes
- Submarines: S-105 ("S" class), Dolphin (SS-169), Shark (SS-174), Perch (SS-176), Salmon (SS-180) and Balao (SS-285 to SS-291) classes
- Also used on armed yachts, patrol gunboats, Eagle boats and various auxiliaries
- Submarines of the Gato class (SS-212) as refitted
Set 2 Units
Real scaled from original
Hollowed to saved material
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.