1/200 Kirov class aft structure 1-2-3 Part 2
Surat, Gujarat
6 hours ago

Contact "US" for ADDITIONAL HUGE DISCOUNTS on all Ship Superstructures, fittings and armaments between 1/5 - 1/144 scale



1/200 Kirov class aft structure 1-2-3 Part 2

Regular price $64.30

Shipping calculated at checkout.
1/200 scale very hi detailed and accurate model of Soviet Kirov class - Fore Superstructure  Deck 1-2-3 Part 2.

The Kirov class, Soviet designation Project 1144 Orlan (sea eagle), is a class of nuclear-powered guided missile cruisers of the Soviet Navy and Russian Navy, the largest and heaviest surface combatant warships (i.e. not an aircraft carrier or amphibious assault ship) in operation in the world. Among modern warships, they are second in size only to large aircraft carriers, and of similar size to a World War I era battleship. The Soviet classification of the ship-type is "heavy nuclear-powered guided missile cruiser" (Russian: тяжёлый атомный ракетный крейсер). The ships are often referred to as battlecruisers by Western defence commentators due to their size and general appearance.
The appearance of the Kirov class played a key role in the recommissioning of the Iowa-class battleships by the United States Navy in the 1980s.
The Kirov class hull design was also used for the Soviet nuclear-powered command and control ship SSV-33 Ural.


Suitable for: Soviet Kirov-class battlecruiser

Real scaled from original
Hollowed to saved material.
Model unpainted.

If you need a different size or a custom part designed just for you? 
Please send me a PM.

Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features.  Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners.  Customers report that "Bestine" and "Goo Gone" also work well.

During the printing process, liquid resin is cured by ultraviolet light.  Microscopic bits of resin may remain uncured.  Let your parts sit in direct sunlight for a few hours to fully cure the resin.