1/72 scale very hi detailed and accurate model of anchor 30.000lb. weight for USN battleships.
This verson are movable like real thing.
Recommended for:
Included 2 Kits
Real scaled from original
Hollowed to saved material.
Model unpainted
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
This verson are movable like real thing.
Recommended for:
- USS Missouri
- Tennessee class battleship
- Iowa class battleship
- USS Arizona BB-39
- USS Tennessee BB-43
- USS California BB-44
- USS Maryland BB-46
- USS North Carolina BB-55
- USS Washington BB-56
- USS Massachusetts BB-59
- USS South Dakota
- USS Alabama
- USS Indiana
- USS Iowa BB-61
- USS New Jersey
- USS Missouri
- USS Wisconsin
- USS Kentucky
Included 2 Kits
Real scaled from original
Hollowed to saved material.
Model unpainted
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
