Included partsin Set:
1. MK Launcher
2. Pedestal to raise the Mk10 to be in line with the forward missile house
3. Big Missile Ejector go to forward part of the ship
4. Small Missile Ejector go on aft (that's if your ship has 2 Mk10's)
USS Long Beach CGN-9
USS Bainbridge CGN-25
USS Truxtun CGN-35
USS COONTZ DLG-9
Lahey Class Cruisers
Belknap Class Cruisers
Kitty Hawk Class Aircraft Carriers
Farragut Class Destroyers
Real scaled from original
Hollowed to saved material
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.